• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Coupling Tips

Bellows, Flexible and Servo Couplings Resource and Information site

  • News
  • Coupling Types
    • Beam
    • Bellows
    • Disk
    • Elastomer
    • Gear
    • Jaw
    • Linear
    • Magnetic
    • Oldham
    • Rigid
    • Safety
    • Torque Limiters
  • Flexible
  • Miniature
  • Servo
  • Resources
    • Suppliers
    • Video
  • Advertise
  • Subscribe

stafford manufacturing

Weldable flange collars

August 21, 2024 By Mike Santora Leave a Comment

Weldable flange collars new standard line is made from 1018 steel.

A new standard line of weldable flange collars made from 1018 steel to let users weld components instead of using fasteners has been introduced by Stafford Manufacturing Corp. of Wilmington, MA. Stafford Weldable Flange Collars are precision machined from 1018 steel and feature an integral clamp incorporating a double-split design and relief groove. Made to […]

Filed Under: Shaft Collars Tagged With: stafford manufacturing

Shaft end adapters solve compatibility issues

June 15, 2020 By Mike Santora Leave a Comment

Stafford-shaft-end-adapters

A line of machinable shaft end adapters that can be customized to solve a virtually unlimited range of shaft compatibility and component mounting issues in machinery, materials handling, and packaging systems has been introduced by Stafford Manufacturing Corp. Stafford Machinable Shaft-End Adapters come in three configurations where the female clamps onto the shaft end: one […]

Filed Under: Featured Tagged With: stafford manufacturing

One piece, split clamp-type, hexagonal bore shaft collars from Stafford

January 31, 2020 By Mike Santora Leave a Comment

Stafford-hexagonal-bore-shaft-1241C

Used on hexagonal shafts Smooth bore protects shafts from damage Superior holding power over set-screw type collars Exclusively stocked by Stafford, these collars fit on standard hexagonal shafts. They can be modified (drilled, tapped, welded, etc.) to act as mounts for other components. 1-Piece Clamp-Type Shaft Collars are precision machined, non-marring, easy to adjust, with […]

Filed Under: Industry News Tagged With: stafford manufacturing

Rigid shaft couplings customized from standard templates

December 30, 2019 By Mike Santora Leave a Comment

Stafford-coupling-collage

A new standard line of rigid shaft couplings offered with a choice of popular design templates to let users reduce the cost and delivery time of small quantity custom orders has been introduced by Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Customizable Shaft Couplings let users specify their own custom rigid couplings from 7 standard […]

Filed Under: Rigid Tagged With: stafford manufacturing

Shaft collars and couplings meet special robot design requirements

January 11, 2017 By Mike Santora Leave a Comment

Stafford-shaft collar-robot-applications

A wide range of standard and custom manufactured shaft collars, couplings, clamps, mounting devices, and rotary encoders are being introduced to robot makers by Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Shaft Collars, Couplings & Mounting Components for robotic applications include 4,000 standard parts in a wide range of materials, sizes, and configurations. Suitable for […]

Filed Under: Industry News Tagged With: stafford manufacturing

Quick release clamp ATTACHES AND REPOSITIONS WITHOUT TOOLS

November 15, 2016 By Mike Santora Leave a Comment

Stafford-quick-clamp-image

A new line of quick release clamps for use as a clamp, stop, or spacer where ease of use and speed are important is being introduced by Stafford Manufacturing Corp. The Stafford Quick-Clamp features a cam lever for clamping and a knurled nut for adjusting the clamping preset; making it easy to open-close and clamp […]

Filed Under: Industry News Tagged With: stafford manufacturing

Rigid couplings for power transmission applications

January 31, 2014 By Mary Gannon 1 Comment

Stafford-rigid-shaft-couplings-TH

Torsionally stiff rigid couplings are best used on shafts that are already in proper alignment, so are well-suited to pump, mixer, drive shafts, and other power transmission applications. Stafford Manufacturing Corp., Wilmington, Mass., offers a full line of rigid couplings in a variety of configurations and sizes for connecting these types of components. Rigid couplings […]

Filed Under: Industry News, Rigid Tagged With: stafford manufacturing

A look at coupling selection tools

June 7, 2013 By Mary Gannon 1 Comment

ZeroMax Coupling Group 1 09TH

I often think of how the Internet has changed our lives, and how it has made it so much simpler in many ways. For example, buying a rare item meant either hoping your local store had it in stock or paging through catalogs. Going on a trip used to mean highlighting a route on a […]

Filed Under: Industry News Tagged With: baldor, huco, lovejoy, OEP couplings, R+W, radicon, ringfeder, Ruland Manufacturing Co., skf, stafford manufacturing, tbwood, Timken, zero-max

Corrosion-Resistant Couplings Suitable For Multiple Applications

February 25, 2010 By CouplingTipsAdmin Leave a Comment

A full line of shaft collars and couplings for pump drive and structural systems in water treatment, pollution control, and similar facilities is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Corrosion-Resistant Collars and Couplings are offered in 303 and 316 stainless steel, brass, bronze, and other materials for various power transmission and structural […]

Filed Under: Featured, Safety Tagged With: harsh chemicals, stafford manufacturing, water treatment

Stafford Stepped Couplings

December 2, 2009 By CouplingTipsAdmin Leave a Comment

Stafford Manufacturing Corp. offers a line of rigid, clamp-type reducer couplings that are stepped down to mate large and small shafts, inch-to-metric shafts and smooth to keyed bores. Stafford Stepped Couplings include one-, two- and three-piece styles with reducer bores for connecting shafts from 1/4” to 2-1/2” I.D., including inch-to-metric and smooth-to-keyway. Featuring eight hex […]

Filed Under: Rigid Tagged With: clamp, custom requirements, load applications, stafford manufacturing

  • Page 1
  • Page 2
  • Go to Next Page »

Primary Sidebar

“ct
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Design Engineering Professionals.

Learning Center

Design World Learning Center

RSS Featured White Papers

  • How To Specify Couplings For Servo Applications
  • Plastic solutions for automotive manufacture and design
  • Compact Coupling Widens Torsional Stiffness Range and Offers High Torque Transmission

Footer

Coupling Tips

Design World Network

Design World Online
The Robot Report
Motion Control Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering
Wire and Cable Tips

Coupling Tips

Subscribe to our newsletter
Advertise with us
Contact us
About us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy