• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Coupling Tips

Bellows, Flexible and Servo Couplings Resource and Information site

  • Latest Updates
  • Coupling Types
    • Beam
    • Bellows
    • Disk
    • Elastomer
    • Gear
    • Jaw
    • Linear
    • Magnetic
    • Oldham
    • Rigid
    • Safety
    • Torque Limiters
  • Flexible
  • Miniature
  • Servo
  • Suppliers
  • Video
You are here: Home / Products / Shaft Collars / Ruland WCL-10-F double wide shaft collar

Ruland WCL-10-F double wide shaft collar

January 12, 2021 By Mike Santora Leave a Comment

ruland-shaft-collarRuland WCL-10-F is a one-piece double wide shaft collar with a 0.6250-in. bore, 1 5/16-in. OD, and 15/16-in. width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002-in.). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings.

Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. WCL-10-F is stamped with the Ruland name and bore size for ease of identification. This double wide shaft collar has 25% higher axial holding power than a round bore of equivalent size. It can also be used as a short rigid coupling for applications where a traditional rigid coupling is too long.

Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. WCL-10-F is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. WCL-10-F is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland
www.ruland.com

Filed Under: Shaft Collars Tagged With: rulandmanufacturing

___

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Coupling Product Search

Enews Sign Up

Signup for the newsletter
Coupling Design Guides

RSS Featured White Papers

  • How To Specify Couplings For Servo Applications
  • Plastic solutions for automotive manufacture and design
  • Compact Coupling Widens Torsional Stiffness Range and Offers High Torque Transmission
www.BearingTips.com

Sidebar bottom

Follow us on Twitter

Tweets by CouplingTips

Footer

Coupling Tips

Design World Network

Design World Online
The Robot Report
Motion Control Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering

Coupling Tips

Subscribe to our newsletter
Advertise with us
Contact us
About us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on YouTubeAdd us on Instagram

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy