Latest High Speed Tab Inserter Systems From UMG Technologies

Danvers, MA – 24/7 automated operation has become an industry standard for UMG Technologies high speed tab inserters used in the manufacture of electronic printed circuit devices. These systems are designed for continuous, unattended operation with minimal maintenance due largely to top notch design engineering and the use of the latest and best off-the-shelf component technology.

The motion systems in these high speed automated inserters for example, employ servo motors connected to ball screws by means of zero-backlash ServoClass® couplings from Zero-Max. These tab inserter systems are used in the assembly of printed circuit boards for automotive and consumer interconnect devices and have insertion speeds up to 18,000 components an hour. The couplings damp out any backlash or harmonic tendencies that might occur in the system’s rapid step and repeat cycles as it precisely inserts connecting tabs into the circuit boards.

UMG Technologies PLT-901 Tab Insertion System used in the manufacture of electronic printed circuit board interconnect devices. It has an insertion speed up to 18,000 components an hour.	With a feed rate of 20 inches a second, these tab inserters have motion systems that employ servo motors connected to ball screws by means of zero-backlash ServoClass® Couplings from Zero-Max.

UMG Technologies, Inc. in Danvers, MA, specializes in designing and building these assembly interconnect systems with a focus on odd-form insertion, terminal, pin, eyelet, bulk wire, axial insert laser marking and continuous mechanical connector insertion systems for use in the consumer electronic, automotive, electronic manufacturing services, telecommunications and aerospace industries. They are programmable and can handle a full menu of different circuit boards.

Dual head inserter with in line conveyor. Note ball screw positioned behind inserter mechanism. The system features quick change anvil support tooling for flexible product changeover.

UMG’s PLT-901 dual head inline tab inserter is considered the industry standard in interconnect assembly machine technology, performance and reliability. The XY and rotary stage moves at speeds up to 20 inches a second with throughput rates of up to 18,000 insertions per hour. To achieve this high level of output, the interconnect material for these tabs must feed through the system with a high degree of accuracy and smooth motion. Tabs must align accurately at the cut and excise station where the system’s insert head transfers the interconnect into the printed circuit board while the lower anvils support the press-fit insertion.

In designing the drive system for these automated inserters, Robert Sooy, project engineer for UMG Technologies, decided the most effective connection of the servomotor (Yaskawa 200 watt brushless) to the ball screw (Kuroda 15 m X 10 mm) was with the ServoClass coupling because it is designed specifically to handle the specific sensitivities of servo systems. That means the coupling must take into account the mechanical as well as the electrical attributes of the system with the mechanical components keeping up with the electronic commands of the controller. The design specifications of the ServoClass coupling aid in making these two entities work well together.

Zero-Max Double Disc ServoClass couplings are specifically designed to meet the precision positioning requirements and high reverse load characteristics of today’s AC and DC servomotor applications.

“We tested the ServoClass coupling to verify it could handle the demands and high output of our servo system and were pleased with the coupling’s inertia and torsional stiffness features,” reported Sooy. “Tab alignment and positioning is really critical in these systems and with the high feed rate, any motion disparity when the anvil and insertion head meet has to be avoided or tabs can misalign and shut down the system. We needed a coupling that would operate reliably in this high speed, high volume 24/7 environment. We tried other steel, bellows-type couplings but preferred the Zero-Max single piece design with integral clamp style hubs. We ruled out couplings with steel spiral type center members because we needed torsional rigidity in our servo connections in order to eliminate any tendencies for harmonic vibration and backlash that could affect the servo controls positional and dynamic accuracy. The specs we saw and the tests we performed with the ServoClass Model SC035 gave us everything we needed to accomplish that.”

ServoClass SC035 couplings have torsional stiffness of 309 in-lb/degree and axial stiffness of 160 lb/in (N/mm).

ServoClass couplings are designed to meet the precision positioning requirements and high reverse-load characteristics of AC and DC servomotor applications. The couplings are flexible yet torque rigid because of their unique stainless steel double-flex disk design. It’s this design that provides the misalignment capacity, as well as the coupling flexibility to reduce reaction loads. The result is smoother system performance and longer operating life of the connected components.

The Zero-Max’s SC035 coupling that UMG Technologies uses has operating torque of 50 in-lb (6.0 Nm) at a maximum 10,000 r/m. It has torsional stiffness of 309 in-lb/deg and axial stiffness of 160 lb/in (N/mm). The coupling’s misalignment capacity is 0.009 inch (0.22 mm) parallel, 1.0 degree angular and 0.020 +/- inch (+/- 0.50) axial. It has moment of inertia of 0.0899 lb-in2 (26.3 kgm2 x106).

In the UMG application, the ServoClass coupling accelerates from 0 to 3000 rpm every half second and does so continuously. The only downtime needed with these systems is when a specific tab size insertion run is complete and a new one is started or when the interconnect inventory reels empty. (Reels have a capacity for approximately one hour of tab material.) Re-loading reels takes just two minutes for an operator to load. According to Sooy, there have been no coupling problems reported from any system users with over 600 machines in use for as long as 11 years.

“We also like the ServoClass coupling for its keyless clamp-type mounting hubs, “Sooy reported. “Their drop-in design makes them easy to connect and align during the machinery build cycle. There’s no need to align them with special tools or lasers. Once in place, they do the job they’re intended to do.”

For more information on UMG Technologies’ In-Line Tab Inserter systems:

Website: www.umgtinc.com Email: sales@umgtinc.com

For information on Zero-Max:
www.zero-max.com

New: R+W Series SK2 Safety Coupling

Completely corrosion proof for outdoor and wash-down applications, the R+W SK2 can be a failsafe solution to overload problems.

Torque overload protection is often overlooked in machine design until something jams resulting in expensive damage and down time. The R+W Series SK2 safety coupling was developed specifically for this purpose. It uses a patented ball detent system that is absolutely backlash free and will disengage within 1 to 3 milliseconds when an overload is detected.

Four versions are available including a single position, multi-position, load holding, and free wheeling. These couplings are preset in the factory to a customer specified disengagement torque and can be adjusted in the field after installation.

These unique couplings are manufactured with a stainless steel bellows exhibiting very high torsional rigidity with zero backlash. The moment of inertia is also very low due to its low mass and low weight, making them ideal for servo driven systems.

The SK2 couplings are available for a torque range of 0.2 to 1800 Nm (1.8 to 15,930 in. lbs.). Both shaft hubs are custom bored for shaft sizes of 4 to 80 mm (0.25in to 3.125in.).

More details at http://www.rw-america.com/torque-limiters/index.html

www.rw-america.com

Huco Tools Assist Coupling Selection for Design Engineers

Huco Dynatork, an Altra Industrial Motion company, offers the worlds most comprehensive range of small precision couplings from a single manufacturer. Huco’s precision couplings are ideal for use in high-end servo drives, pulse generators, scanners, X-Y positioning slides, high speed dynamometers, measuring instruments, robotics, machine tools and in many other applications where specific dimensional or performance criteria is required.

Because there is such a wide range of different motion control couplings from which the design engineer can choose, Huco offers a complete Design Guide to coupling performance characteristics on the company’s website.

The website also contains a unique Coupling Selector designers can use as a tool to identify the coupling types that meet their design criteria for angular, radial or axial misalignment, or a combination of all three. The interactive tool helps designers understand whether they need a bellows, membrane, sliding disc or helical beam, or another design.

The Coupling Selector takes the key information provided about the application and presents all the couplings that fit the criteria, with a link to the detailed specification of each coupling. Selection is based upon coupling type (mechanism), dimensions, shaft connections, performance, displacement and other conditions.

www.huco.com

MISUMI to Hold Contest at ATX West Show

Schaumburg, IL — Misumi USA announced that it will be holding a contest titled, “Go Configure” at the upcoming ATX West show in Anaheim, CA on February 10-12, 2009 in Booth Number 4601. The contest is Co-Sponsored by Design World Magazine and contest ballots will be available in the show issue of Design World magazine as well as the Misumi and Design World show booths.

A daily 3PM drawing for a $50.00 American Express Gift Card will take place at the Misumi booth. In addition to the daily prize, a First Prize of a $200.00 American Express Gift Card, Second Prize of an iPod Nano and the Grand Prize of an iPod Touch will be awarded during the 3PM daily drawing on the last day of the show, Thursday, February 12, 2009.

Misumi is the leader in supplying fixed and configurable components for all types of motion control, assembly and related factory automation devices. Highlighted at this year’s ATX West show will be the company’s new 2009 Catalog featuring 3000 New product and 1,500 products with increased configurability and materials. New products that will be showcased at the booth single-axis actuators, linear guides, shaft supports, self lubricating bushings, left handed ball screw, compact square supports and more. Most Misumi components are configurable, with downloadable CAD files and full specs available at the company’s website.

Also, during the show, Misumi will conduct its Configurable Component Technical Seminar onsite to demonstrate the advantages of configurable components to machine, equipment and assembly system engineers attending the show. Booth personnel will be available to register engineers for the seminar, to be held onsite at the convention center during the show. In addition, the company will register attendees to receive the company’s newest catalogs, containing over 500,000 products for the machinery and equipment designer.

To enter the Go Configure! Contest today, go here for an online ballot>>

For more information on ATX West and to register for a FREE Pass to the show, please visit www.ATXwest.com today.

www.misumiusa.com

Helical’s Flexible Helix Beam

SANTA MARIA, CA. – Helical Products Company’s curved beam “flexure” can be designed and manufactured into a variety of special shapes and forms for use in a variety of diverse applications.

Used as a flexible coupling or u-joint, the “flexure” utilizes its curved beam to transmit torque while compensating for lateral, angular and axial movements. The technology enables designer specified end attachments, such as tangs, clamps, flanges or threaded ends to be integrated into a single, multi-fuctional component.

www.Heli-Cal.com

Go Configure!

Schaumburg, IL — Misumi USA announced that it will be holding a contest titled, “Go Configure” at the upcoming ATX West show in Anaheim, CA on February 10-12, 2009 in Booth Number 4601. The contest is Co-Sponsored by Design World Magazine and contest ballots will be available in the show issue of Design World magazine as well as the Misumi and Design World show booths.

A daily 3PM drawing for a $50.00 American Express Gift Card will take place at the Misumi booth. In addition to the daily prize, a First Prize of a $200.00 American Express Gift Card, Second Prize of an iPod Nano and the Grand Prize of an iPod Touch will be awarded during the 3PM daily drawing on the last day of the show, Thursday, February 12, 2009.

Misumi is the leader in supplying fixed and configurable components for all types of motion control, assembly and related factory automation devices. Highlighted at this year’s ATX West show will be the company’s new 2009 Catalog featuring 3000 New product and 1,500 products with increased configurability and materials. New products that will be showcased at the booth single-axis actuators, linear guides, shaft supports, self lubricating bushings, left handed ball screw, compact square supports and more. Most Misumi components are configurable, with downloadable CAD files and full specs available at the company’s website.

Also, during the show, Misumi will conduct its Configurable Component Technical Seminar onsite to demonstrate the advantages of configurable components to machine, equipment and assembly system engineers attending the show. Booth personnel will be available to register engineers for the seminar, to be held onsite at the convention center during the show. In addition, the company will register attendees to receive the company’s newest catalogs, containing over 500,000 products for the machinery and equipment designer.

For more information on ATX West and to register for a FREE Pass to the show, please visit www.ATXwest.com today.

www.misumiusa.com